Home Contact Us Sitemap

Hebe Solar Products Solution Press Solar Energy
Reliability Quality Value
Home >> products Catalogue >> Photovoltaic Solar Modules >> 60Wp70Wp photovoltaic panels
 
 
60Wp70Wp photovoltaic panels

photovoltaic panels

 
 
 
Features of Goods:
 

photovoltaic panels

Hebe Solar design and production quality insure a  long-term performance, high-yield for every photovoltaic panel produced.

KEY FEATURES
36 High-Efficiency Solar Cells
Special Aluminum Frame Design - The specially treated frame aluminum substantially increases module
endurance against high winds and snow load and solar cells panels for homes.
Reinforced Solar Glass - The high-transparency low-iron tempered glass allows maximum light
permeability while enhancing stiffness and impact resistance.
Advanced Cell Encapsulation - The interconnected cells are embedded in ultra transparent EVA with
multilayer backsheets for additional weather protection.
Optimized Module Surface Area - The distance between the frame edge and the cell circuitry is
calculated according to the electrical output optimization. Residential PV panel 60w for homes.


APPLICATIONS
Power source for remote telecommunication equipment
Monitoring systems for the oil & gas industry
Traffic, security, environment, and other remote information monitoring systems
Water pumping systems
Rural electrification
Small home power systems
12V or 24V battery charging system
Other industrial and consumer applications from 60/65 watts photovoltaic panels for domestic application.

WARRANTY
Cathodic protection systems usually apply from 60 watts photovoltaic panels for homes.

Detailed description of Goods:
 

 

CELL TYPE  MONO OR POLYCRYSTALLINE SOLAR CELL
ITEM  HSP60  HSP65 
Maximum Power (Wp)  60 W  65 W 
Maximum Power Voltage (Vm)  17.4 V  17.6 V 
Maximum Power Current (Im)  3.46 A  3.70 A 
Open circuit Voltage (Voc)  21.7 V  22.0 V 
Short circuit Current (Iso)  3.72 A  3.76 A 
Length*Width*Depth ( mm ) 800*666*35
Weight kg  7
Number of cells  36
Maximum system voltage  1000 VDC 
Output tolerance  +/-5% 
FF  >= 72% 
Standard Test conditions  STC: AM 1.5, 1000w/m2, Module Temperature 25ºC 

You may also like:
 
 
 
 
 
 
 

Hebe Solar  |  Products  |  Solution  |  Press  |  Solar Energy  |  Contact Us  |  Sitemap  | Link Exchange | 
2004-2008, Hebe Solar Co., Ltd. All Rights Reserved.
Phone:+86 574 82162773 Fax:+86 574 88059292 E-mail: sales@hebesolar.com Url: http://www.hebesolar.com